Начать поиск

How to record music with AVS Audio Editor?

Введение

If you need to record music or any other sounds produced by the computer you can use the Stereo Mix feature of your computer sound card. AVS Audio Editor will help you perform this task.

Шаг 1: Загрузите и установите программу AVS Audio Editor

Click here , чтобы загрузить программу. После того, как загрузка завершится, запустите файл AVSAudioEditor.exe и следуйте инструкциям Мастера установки.

[Вернуться наверх]

Шаг 2: Create a new file

Click the New... button on the Home tab of the Ribbon Command Bar.

The New File window will be opened allowing you to define file properties that will contain the recorded audio data. The following parameters are available: Sample Rate, Sample Size, Number of Channels and New File Name.

How to record music with AVS Audio Editor? Step 2

Use the OK button to save the selected parameters and close the New File window. A new empty file will be created.

[Вернуться наверх]

Шаг 3: Adjust recording settings

Open the Record tab to be able to adjust recording settings.

How to record music with AVS Audio Editor? Step 3

Here you can quickly adjust general recording settings: select and test an input device, set its balance and gain. If you press the Advanced button of the Recording Options group you will be able to configure the same parameters and some additional recording settings.

The Options window will appear with the opened Recording tab. Select the Stereo Mix option in the Input drop-down list.

Note!Note: you can enable or disable the needed device and adjust its properties directly from the program interface using the Windows recording control button to open the window with the list of Windows recording devices.

After selecting the Stereo Mix option you can adjust the following recording settings:

  • Balance - set the difference of the sound volume between the right and the left channel;
  • Gain - set the loudness of the device input;
  • Recording Mode - choose the way you want to record new audio: you can either overwrite the original sound or mix it with the recorded audio;
  • Recording Path - specify the file where the recorded audio will be saved to. Select the Start recording to the current file option to record your music to the created file.
Note!Note: some settings can be disabled depending on the operating system installed on your computer and your sound card.

How to record music with AVS Audio Editor? Step 3

Note!Note: if the drop-down list doesn't contain the Stereo Mix option (the Windows Vista case mainly) and you are completely sure your sound card supports the Sound Mix feature then:
  1. If you are using Windows Vista or 7, click the Windows recording control button below this drop-down list and proceed to Point 5.
  2. If you are using Windows XP or 2003, click the Start menu button and open the Control Panel.
  3. Click the Sound icon.
  4. Open the Recording tab in the appeared window.
  5. Make the right click within the Recording empty area and check the Show Disabled Devices option.
  6. The Stereo Mix device will be shown, enable it by clicking the right mouse button on its icon and checking the corresponding option.
  7. Click OK.

[Вернуться наверх]

Шаг 4: Test your device

To make sure that the volume level of the original sound signal is enough to record it and the Stereo Mix works properly, click the Test Input button. You will see the blue lines inside a special box move and change shape. Each line corresponds to a channel.

When you are through with your test, press the Stop Test button. Then click the OK button to apply the changes made and close the Options window.

How to record music with AVS Audio Editor? Step 4

[Вернуться наверх]

Шаг 5: Record the music

To begin the recording process click the Start the recording button at the bottom of the program window. Don't forget to start playing the music that is supposed to be recorded (e.g. load a media player or Internet radio).

How to record music with AVS Audio Editor? Step 5

The Volume Indicators on the right display whether or not the level of the signal coming from your sound card is strong enough during recording. As soon as you finish the recording process, press the Stop the recording button at the bottom of the program window. To playback the resulting audio file click the Go to Previous Marker button to play the track from the very beginning and then press the Play button.

Note!Note: you can also use buttons from the Recording Controls group on the top of the program window to manage the recording process.

How to record music with AVS Audio Editor? Step 5

To save the created audio file, go back to the Home tab and click the Save button. For more detailed information on the saving options of AVS Audio Editor refer to the corresponding section of the Online Help

[Вернуться наверх]

Версия: 8.4.4.521Размер: 29.95 МбПлатформы: Windows 10, 8.1, 8, 7, XP, 2003, Vista
(Mac OS/Linux не поддерживаются)
Загрузить
AVS Audio Editor

Регистрация на AVS4YOU представляет собой покупку одного продукта, представленного на сайте www.AVS4YOU.com, и получение всех остальных продуктов с нашего сайта. Это значит, что Вы можете установить и использовать ВСЕ ОСТАЛЬНЫЕ программы с тем же самым лицензионным ключом без дополнительных платежей и без ограничений.
Пожалуйста, обратите внимание на то, что программы AVS4YOU не позволяют вам копировать защищенный материал. Вы можете использовать эти программы, если владеете авторскими правами на копируемый материал или получили разрешение на копирование от владельца авторских прав.

Используя наши сервисы, вы соглашаетесь с тем, что мы используем файлы cookie.