As has been mentioned before, the wizard window will look differently depending on the capture device used. For example, if you are using a TV tuner as capture device, you should set the following parameters for video capturing at Step 1:

1. Select Video Device from the list of the available video devices. It is the list of devices available in the system.
   Note: it's possible to change video device parameters by clicking the Configure button.
2. Set Video Input. It will define the type of the input that receives the video signal.
3. Set Video Standard from the list of available video standards. Sometimes it can be necessary to change this setting so that the video picture became colored instead of black-and-white.

   There are the following TV standards: NTSC (N, M, J) , PAL (N, M), SECAM.

   • NTSC is used in the United States, Canada, Mexico;
   • NTSC-M is used in the most of the Americas and Caribbean, Philippines, South Korea, Taiwan;
   • NTSC-J is used in Japan;
   • NTSC-N is used in Paraguay and Bolivia;
   • PAL is used in the most of European countries;
   • PAL/SECAM is used in France;
   • PAL-M is used in Brazil;
   • PAL-N is used in Argentina, Paraguay, Uruguay.
4. Select the Output size in the drop-down combo box.
   Note: you can change the Frame Rate clicking the appropriate button.
5. To modify audio parameters, first select Audio Device or mute it checking the appropriate check-box and select Audio Input and the output Audio Format.
6. You can also adjust Audio input device parameters by clicking the Configure button located near Audio Device Parameters box.

After you finished please click the Next>> button to proceed to the second step.